Glass-Like Visualization of an AMCM 3D Printer Section

Products

AMCM offers enhanced small serial products based on proven EOS legacy systems. Each of our AMCM small serial products below, or any EOS system, can be adapted to the customer's needs, which we call Selected Customization.

If this is not enough we start from scratch, we go for Full Customization.

AMCM M 290 FLX

Compatible with legacy EOS M 290 (400 W) process for 85 μm spot process parameter sets (same focus, beam quality, etc.).

Excellent part properties at unparalleled speed.

Click Me

AMCM M 290-1 FLX with one kilowatt laser nLight laser and beamshaping

2x

1.2 kW nLIGHT AFX
3x

higher productivity
500° C

build plate temperature possible with plug-in module
7x

spot modes, 85-210 µm spot size

AMCM M 290-2 1kW

Increased productivity for multiple materials (e.g. Al and Cu) - Excellent part properties e.g. Cu density, electrical conductivity - Compatible with legacy M 290 400 W process parameter sets e.g. same focus, beam quality - Ability to pre-develop 1 kW processes on a mid-size platform for later transfer to other single or multi-laser 1kW platforms (e.g. AMCM M 450 or AMCM M 4K) -Open software for process optimization with high power laser

Click me

290-2 1kW 3D printing system with dual laser set-up

2x

the 1 kW punch
Enabling

aluminum and copper
500° C

build plate temperature possible with plug-in module
30+

EOS legacy processes available

AMCM M 290-2 FDR

Wall structures of down to 100 µm – with the AMCM M 290-2 FDR you can do it. We can modify the AMCM M 290-2 FDR to your specific need and a range of materials such as tungsten.

Click me

290-2 FDR 3D printing system with fine detail resolution

2x

40 µm spot
50%

Reduction in wall thickness
100%

Full 400 W laser power

AMCM M 450

Larger building envelope 450 x 450 x 400 mm (building height incl. build plate) - Compatible with legacy EOS M 400 process parameter sets e.g. same focus, beam quality - Open software for process optimization - Calibration and overlap adjustment with SmartCAL

Click me

AMCM M 450-4 1kW 3D printing system angeled view

4x

400 W, 1 kW, 1.2 kW FLX
25%

larger build volume than EOS M 400
5x

powder feeding capacity
30+

EOS legacy parameters

AMCM M 4K

Large building volume of 450 x 450 x 1,000 mm - Beam Shaping optional 85 – 210 µm - Compatible with legacy EOS M 400-x process parameter sets, e.g. same focus, beam quality - Robust welded machine frame design - Open software for process optimization with high power laser - Calibration and overlap adjustment with SmartCAL

Click me

AMCM M 4K 3D printing system for one meter tall components

1 m

build height
4x

1 kW, 1.2 kW FLX
3.5x

larger build volume than EOS M 400
30+

processes available

New fully customized platform for large format printing

AMCM M 8K

Full Customization